Gilbert Plumbing Company is the call for residential and commercial plumbing across Gilbert and Maricopa County. Whether you are dealing with a drain that stopped moving, a water heater that quit, a slab leak showing up as a wet floor, or a full repiping job on an aging home, we handle it. Our work covers repairs, installations, drain service, water heaters, sewer lines, repiping, fixture work, and more. Sound pipes. Solid workmanship. Straight answers.
Call (480) 259-3533 for a quote.
We are available every day from 6:30 AM to 9:00 PM. Give us a call and we will take it from there.
Every home's plumbing tells a different story, and so does every commercial property. We work with homeowners, renters, landlords, property managers, offices, multi-family buildings, and rental properties across the area. The scope of what we handle is broad: drain cleaning and clog removal, leak repair, water heater service, fixture installation, sewer line work, garbage disposals, repiping, water pressure diagnostics, and shutoff valve repair. When you call, you get the rate before anything is scheduled. Pricing is confirmed on the phone so you know what you are looking at before we ever show up. We are a straightforward choice for homeowners and property managers who want the work scoped and priced clearly. Reach out and we'll get it diagnosed quickly.
Keeping a home dry starts with the pipes behind the walls, and it starts even further back with the drains that carry everything away. Slow kitchen drains, backed-up bathroom lines, and main line clogs are among the most common calls we get. We clear blockages in individual fixtures as well as the main line that runs from the house to the city connection. For stubborn blockages that cable work alone will not clear, hydro jetting pushes through grease, scale, and debris that has built up over time. On the sewer line side, we handle repair and replacement when the line itself is damaged or deteriorated. We take pride in the plumbing work we leave behind, and that means clearing the line completely rather than stopping at the symptom. Leave the leak to us.
Choosing the right plumbing fix is easier than it sounds when the leak is actually located first. A dripping faucet is one thing. A leak inside a wall, under a floor, or along a supply line running through a slab is another. We use pressure testing and electronic detection methods to find the source before any repair work begins. That approach keeps the work focused and avoids opening up walls or floors unnecessarily. Once the leak is located, we repair the affected section or replace the line depending on what the pipe condition calls for. When a home has recurring leaks, low pressure throughout, or aging pipe material that keeps failing in different spots, whole-house repiping becomes the right conversation. We repipe in PEX, which handles the thermal expansion common in Arizona's climate well and holds up to the mineral content in the water here. We protect your floors and finishes while we work, and the job is done to the scope agreed on the call. One call gets the leak looked at.
If you're not sure your water pressure is where it should be, or you woke up to no hot water, these are exactly the kinds of problems we handle. On the water heater side, we repair and replace both tank units and tankless systems. When a unit is past the point of repair, we walk through replacement options and confirm the pricing before anything is scheduled. Fixture work covers the full range: toilets, faucets, sinks, garbage disposals, outdoor faucets, and hose bibs. Whether it is a bathroom plumbing installation as part of a remodel or a single faucet swap in the kitchen, the job gets done right. Water pressure problems get their own diagnostic process. Low pressure throughout a home often traces back to a failing pressure reducing valve or a partially closed shutoff valve rather than a pipe problem. We test, confirm the cause, and replace what needs replacing. When you call, the job gets scoped on the phone, not guessed at.
Gilbert's water is some of the hardest in the country, the soil under most homes is expansive clay over a slab foundation, and the heat runs year-round. Those three facts drive more plumbing calls here than in most parts of the country. The services below come up constantly in this area, and we handle all three.
The mineral content in Gilbert's water is high enough that it leaves visible scale on fixtures and works on pipes and water heaters from the inside out over time. A water softener removes the calcium and magnesium before the water reaches your fixtures. We install whole-home water softeners, filtration systems, and combination treatment setups sized to the household. A visit starts with understanding what is in the water and what the home's plumbing already looks like, so the right system goes in the first time.
Most homes in Gilbert sit on a concrete slab with supply and drain lines running underneath. When a line develops a leak below the slab, the first sign is often a warm spot on the floor, a spike in the water bill, or water showing up where it should not be. By the time those signs appear, the leak has usually been running for a while. We locate slab leaks using pressure-based and electronic detection methods that pinpoint the source without tearing up the floor to find it. Repair options depend on what the pipe looks like: a direct spot repair works when the damage is isolated, and a reroute above the slab is the right call when the pipe condition underneath is not worth patching.
Arizona's climate means hot water demand does not let up the way it does in cooler parts of the country. A tankless unit heats water on demand rather than keeping a full tank warm around the clock, which removes the standby heat loss that adds up in a warm-weather climate. We handle the full installation: gas line or water line connections, proper sizing for the home's demand, and the venting work on the plumbing side. We also service and repair existing tankless units when performance drops or the unit stops producing.
Renovation work and new construction both require plumbing that is rough-in ready before the walls close. We handle plumbing rough-in for bathroom remodels, kitchen remodels, home additions, and commercial build-outs. The work applies equally to single-family homes, condos, townhouses, and multi-family properties. We also handle gas line connections on the plumbing side, running and connecting the line and valve to where an appliance will sit. Backflow prevention installation and testing rounds out the commercial and residential work we do for properties that require it. We give honest recommendations on repairs, never an upsell, and that applies to renovation work the same as it does to a service call. One call gets the leak looked at.
We take calls across Gilbert and into the surrounding east Valley communities. That includes Chandler, Mesa, Tempe, Queen Creek, San Tan Valley, and Scottsdale. Residential and commercial work across Maricopa County is part of the regular schedule. We are available every day from 6:30 AM to 9:00 PM, and emergency plumbing calls are taken during those hours. If a pipe has failed or a water heater has stopped working, call during our hours and we will get it on the schedule.
A plumbing emergency is any situation where waiting causes active damage or makes the property unusable. A burst or heavily leaking pipe, a complete loss of hot water, a main sewer line backing up into the home, or a shutoff valve that will not close are all situations that warrant an urgent call.
We take emergency calls every day from 6:30 AM to 9:00 PM at (480) 259-3533.
Describe what is happening and we will work through the fastest path to getting it addressed.
Slab leaks in Gilbert are common because most homes here are built on concrete slabs over expansive clay soil, and that soil movement puts stress on the pipes embedded in the concrete. Detection starts with pressure testing to confirm there is a leak in the system, followed by electronic detection methods that pinpoint the location without cutting into the slab to find it. Once we know where the leak is and what the pipe condition looks like, we confirm the repair options and the pricing before any concrete work begins.
The most common signs are no hot water or inconsistent heating, water that is discolored or has an unusual smell, a unit that is making popping or rumbling sounds, or visible moisture around the base of the tank. A unit that is not keeping up with the household's demand, especially in a larger home, may need a flush and inspection before a replacement conversation starts. We confirm on the call whether the situation sounds like a repair or a replacement and give you the rate before anything is scheduled.
Whole-house pressure loss usually points to a failing pressure reducing valve, a partially closed main shutoff, or a supply line that has corroded internally to the point of restricting flow. In Gilbert, galvanized steel pipe in older homes is a common cause because the interior corrodes over time without any visible sign from the outside. We diagnose the source before recommending a fix, because replacing the wrong component does not solve the problem.
Drain snaking breaks through a blockage and restores flow, but it does not clean the pipe wall. Hydro jetting uses pressurized water to clear grease buildup, mineral scale, and debris from the interior of the pipe, which matters when snaking alone keeps producing the same clog a few months later. In Gilbert, hard water scale and grease accumulation in kitchen drain lines are among the most common reasons a line needs jetting rather than a simple snake. We assess the line first and recommend the method that actually clears the problem.
A camera is run through the drain line from an access point, and the footage shows the interior condition of the pipe in real time. That tells us whether the problem is a blockage, root intrusion, a buildup of grease or scale, a crack, or a collapsed section. We use what we find to recommend the right repair rather than guessing at the cause from the symptoms. Camera inspection is part of how we scope sewer line work before committing to a repair method.
A toilet that runs continuously after flushing, cycles on and off on its own, or produces a faint hissing sound is wasting water around the clock. The cause is usually a worn flapper, a faulty fill valve, or a float that is not shutting off correctly. A running toilet can add a meaningful amount to a monthly water bill in Gilbert, where water rates reflect the region's supply constraints. A repair call typically resolves it in a single visit once we confirm which component has failed.
A unit that is leaking from the tank itself, rather than from a fitting or a valve, generally cannot be repaired and needs to be replaced. A unit that has significant sediment buildup, produces consistently poor hot water output, or has a heat exchanger that has failed is usually past the point where a repair makes financial sense. We walk through what we find and give you an honest read on whether repair or replacement is the better call for the situation.
A tankless installation covers the water line connections, proper sizing for the home's demand, and the gas line connection on the plumbing side for gas-fired units. Arizona's climate means hot water demand is consistent year-round, so sizing the unit correctly to the household's peak load matters. We also handle descaling service on existing tankless units, which is a routine maintenance requirement in Maricopa County given the mineral content of the local water supply.
A water softener is installed at the point of entry, meaning the supply line where water enters the home, so that treated water reaches every fixture and appliance. The installation covers the supply line connections, a bypass valve, and proper sizing for the home's water usage. Gilbert's water is among the hardest in the country, and a softener reduces the mineral load that builds up in pipes, water heaters, and fixtures over time.
We start with pressure testing to confirm there is a leak in the system and to narrow down which line is affected. Electronic detection methods then let us pinpoint the location of the leak without opening up walls or floors unnecessarily. The goal is to find the source accurately so the repair is targeted rather than exploratory, which keeps the disruption and the cost to what is actually needed.
Galvanized steel pipe corrodes from the inside out over time, gradually narrowing the interior diameter and restricting flow until the pipe fails at a corroded section. Polybutylene pipe, installed in many homes built through the 1990s, is prone to becoming brittle and cracking, often without warning. Both materials are worth replacing proactively when they are found, because patching individual failures in deteriorating pipe is a short-term answer to a whole-system problem.
Simple tasks like replacing a faucet aerator, swapping a showerhead, or tightening a supply line connection under a sink are generally manageable for a careful homeowner. Anything involving the main water line, drain line, gas line connections, water heater, or a leak inside a wall or under a slab is a job where the consequences of an error are significant enough to warrant a professional visit.
If you are not certain what you are looking at, a call to (480) 259-3533 to describe the situation costs nothing and may save a larger repair later.
One call. Scoped properly. Flowing for good. We cover the full range: repairs, installations, drain service, water heaters, sewer lines, repiping, fixture work, water softeners, slab leak detection, tankless installation, and everything in between. You get the rate on the phone before anything is scheduled, so there is nothing to figure out after the fact.
Call (480) 259-3533 We are available every day from 6:30 AM to 9:00 PM.
We handle the full range of residential and commercial plumbing across Gilbert and the surrounding east Valley, from a single backed-up drain to a whole-house repipe. Every job starts with a clear scope and a confirmed price on the phone before anything is scheduled. The table below covers what each service includes, who it fits best, and a practical note to help you decide what to ask about when you call.
| Plumbing Service | What's Included | When to Call | Things to Keep in Mind |
|---|---|---|---|
| Slab Leak Detection & Repair | Pressure-based and electronic pinpointing, Spot repair on isolated damage, Above-slab rerouting when pipe condition warrants, Floor protection during work | Gilbert homeowners noticing warm floor spots, unexplained water bill spikes, or moisture near baseboards | Expansive clay soil under most Gilbert slabs shifts seasonally and puts stress on embedded lines. Early detection keeps a small leak from becoming a large concrete repair. |
| Emergency Plumbing | Burst and heavily leaking pipe response, Main line backup response, Water heater failure, Shutoff valve that will not close | Any situation where waiting causes active damage or leaves the property without water or usable plumbing | Emergency calls are taken every day from 6:30 AM to 9:00 PM. Describe what is happening when you call and we work through the fastest path to getting it addressed. |
| Water Heater Repair & ReplacementMost Popular | Tank and tankless unit repair, Full replacement with sizing confirmed on the call, Sediment flush and inspection, Gas and water line connections | Households with no hot water, inconsistent heating, or a unit showing age or visible moisture at the base | We confirm on the call whether the situation points to a repair or a replacement and give you the rate before anything is scheduled. |
| Water Pressure & Shutoff Valve Repair | Pressure reducing valve testing and replacement, Main and fixture shutoff valve repair, Whole-house pressure diagnostics, Supply line flow assessment | Homes with noticeably low pressure at multiple fixtures or a shutoff valve that no longer closes fully | Low pressure throughout a home often traces to a failing pressure reducing valve rather than a pipe problem. We test and confirm the cause before replacing any component. |
| Water Softener & Water Treatment | Whole-home softener installation, Filtration and combination treatment systems, Point-of-entry supply line connections, Bypass valve installation | Gilbert households dealing with visible scale on fixtures, shortened appliance life, or water that leaves residue on dishes and glass | Gilbert's water ranks among the hardest in the country. A softener installed at the point of entry protects every fixture and appliance in the home from the inside out. |
| Tankless Water Heater Installation | On-demand unit installation, Proper sizing for household peak load, Gas line and water line connections, Descaling service on existing units | Homeowners replacing an aging tank unit or upgrading to reduce standby energy use in Arizona's year-round warm climate | Maricopa County water is high in minerals, so existing tankless units benefit from periodic descaling to maintain output and efficiency. |
| Sewer & Main Line Service | Main line clearing and hydro jetting, Camera inspection of line condition, Line repair and replacement, Root intrusion removal | Properties with slow drains across multiple fixtures, sewage odors, or a history of recurring main line backups | Camera inspection tells us whether the problem is a blockage, root intrusion, or a deteriorating pipe section before we recommend a repair method. |
| Drain Cleaning & Clog Removal | Individual fixture clogs, Main line blockages, Hydro jetting for scale and grease, Camera-assisted diagnosis | Homeowners or property managers with slow or stopped drains in any part of the home | Hard water scale and grease buildup in Gilbert homes often means snaking alone does not hold. Hydro jetting clears the pipe wall, not just the blockage. |
| Toilet Repair & Installation | Flapper and fill valve replacement, Full toilet installation, Slow-flush and running-toilet diagnosis, Wax ring and supply line work | Homeowners with a toilet that runs, cycles on its own, flushes weakly, or needs full replacement | A running toilet in Gilbert can add a meaningful amount to a monthly water bill given regional water rates. Most repairs resolve in a single visit once the failed component is identified. |
| Repiping (PEX) | Whole-house PEX repipe, Replacement of galvanized steel or polybutylene pipe, Supply line rerouting, Fixture reconnection after repipe | Older Gilbert homes with recurring leaks, restricted flow from corroded pipe interiors, or deteriorating polybutylene lines | PEX handles the thermal expansion common in Arizona's heat and holds up well to the mineral content in Maricopa County water, making it a practical long-term choice here. |
| Leak Detection & Repair | Pressure testing to confirm leak location, Electronic detection inside walls and under floors, Targeted pipe repair, Supply line and fitting replacement | Any situation where water is showing up where it should not and the source is not obvious | Finding the leak first keeps the repair focused. We locate before we cut, so the work is limited to what actually needs attention. |
| Faucet & Fixture Installation | Faucet and sink installation, Outdoor hose bib and faucet replacement, Garbage disposal installation and repair, Fixture work as part of remodel rough-in | Homeowners replacing aging fixtures, upgrading during a remodel, or dealing with a dripping or seized faucet | Mineral buildup from hard water accelerates wear on cartridges and aerators. We confirm whether a repair or a full replacement makes more sense before the work begins. |
How do I know if a clog is in a single fixture or in the main line?
A clog limited to one fixture, one sink or one toilet, is almost always in the branch line serving that fixture. When multiple drains in different parts of the home are slow or backing up at the same time, the blockage is typically in the main line. Gurgling sounds from a toilet when you run a nearby sink is another sign the problem is further down the system. We ask a few questions on the call to narrow it down before anything is scheduled.
How do tree roots get into a sewer line, and what does repair involve?
Roots follow moisture, and a small crack or a loose joint in a sewer line is enough of an entry point. Once inside, roots expand with the pipe and can eventually block flow entirely or split the pipe wall. A camera run through the line shows us where the intrusion is and how much of the pipe is affected. Clearing the roots restores flow, but if the pipe wall is cracked or collapsed at the entry point, that section needs repair or replacement to keep roots from returning.
What is the difference between a tank water heater and a tankless unit for a Gilbert home?
A tank unit stores a set volume of hot water and keeps it warm continuously, which means there is always standby heat loss even when no one is drawing hot water. A tankless unit heats water on demand as it passes through the unit, so there is no tank to keep warm. In a warm climate like Gilbert's, where the ambient temperature is already high, standby loss from a tank unit adds up over the course of a year. Tankless units also require periodic descaling in Maricopa County because of the mineral content in the water. We walk through both options and confirm pricing before anything is scheduled.
Cause Found Before Anything Is Replaced
We use pressure testing and electronic detection to locate leaks and confirm the source of a problem before any repair work begins. That keeps the job focused on what actually needs attention.
What causes a faucet or fixture to drip or leak after it has been in use for a while?
The most common cause is a worn cartridge, O-ring, or seat washer inside the valve body. These components wear down with use and eventually stop forming a complete seal. Gilbert's hard water accelerates that wear because mineral deposits build up on the seating surfaces and around moving parts. In some cases the body of the faucet itself is corroded or cracked, which means a repair is not the right call and a replacement makes more sense. We confirm which situation you are dealing with before recommending a fix.
Does a repipe or water heater replacement require a permit, and how is that handled?
Permit requirements for repiping, water heater replacement, and similar work depend on the scope and on whether the work is in the city of Gilbert or in an unincorporated part of Maricopa County. We confirm what applies at your address before the work begins so the job is completed to the standard the local code inspectors enforce here. You do not need to navigate that process on your own.
How long does a whole-house repipe typically take?
The timeline depends on the size of the home, the number of fixtures being reconnected, and the pipe material being replaced. A single-story home with a straightforward layout is typically a one to two day job. A larger home or one with a more complex floor plan takes longer. We give you a realistic scope on the call so you know what to expect before the work starts, including how long the water will need to be off.
Scope Agreed Before Any Pipe Is Cut
The scope and the price are confirmed on the call before anything is scheduled. You know what the visit covers and what it costs before we start.
What causes low water pressure at just one fixture rather than throughout the house?
Pressure limited to a single fixture is usually a localized issue. A clogged aerator on a faucet is the most common cause and the easiest to address. A partially closed supply valve under a sink or behind a toilet can restrict flow to that fixture without affecting anything else. Mineral buildup inside the fixture itself, especially in showerheads, is also common in Gilbert given the hard water. If cleaning or replacing the aerator and confirming the valve is fully open does not restore pressure, the supply line feeding that fixture may need attention.
Do I need to be home for the plumbing work, and what access is needed?
For most interior work, someone needs to be present to provide access to the affected area and to confirm the scope before the work begins. For exterior work like a hose bib replacement or a main shutoff valve repair, access requirements depend on where the shutoff is located. We go over what access is needed when you call.
Clean and Respectful Workmanship
We protect your floors and finishes while we work, and the job site is left in the same condition we found it. If a question comes up after the job is done, call and it gets addressed.
What causes drains to clog repeatedly in the same spot?
A drain that clears and clogs again in the same location is usually dealing with something more than a one-time blockage. Grease and soap buildup coats the pipe wall over time and catches debris on every cycle. In Gilbert, mineral scale from hard water can narrow the interior of a drain line to the point where even a small amount of debris causes a backup. Hydro jetting clears the pipe wall rather than just punching through the blockage, which is why it holds longer than snaking in these situations. If the clog keeps returning after jetting, a camera inspection tells us whether there is a structural issue in the pipe.
How is a garbage disposal problem diagnosed, and when does it need replacement?
Most disposal problems fall into a few categories: the unit hums but does not spin, it does not power on at all, it leaks from the bottom or from a connection, or it drains slowly. A unit that hums without spinning often has a jammed grinding plate, which can sometimes be cleared without replacement. A unit that does not power on may just need a reset. Leaks from the bottom of the unit usually mean the internal seal has failed, which is a replacement rather than a repair. We confirm what is happening on the call and let you know what the visit will involve.
What should I know about shutoff valves in an older Gilbert home?
Shutoff valves that have not been operated in years, which is common in older homes, can seize in the open position or fail to fully close when you need them to. Galvanized and older brass valves are particularly prone to this. A valve that drips when closed or that cannot be turned without significant force should be replaced before it becomes an emergency. We test the main shutoff and fixture shutoffs as part of any service call where access to them is needed, and we flag any that are not operating correctly.
Call (480) 259-3533 to get the scope and the rate on the phone before anything is scheduled. We are available every day from 6:30 AM to 9:00 PM.
(480) 259-3533